Printing Press Defoaming Agent
McLantis manufactures world's first class defoamer, antifoaming agents, defoaming agents
McLantis defoaming agent it used when there is excessive foam in the water circulation tank of the printing press. If bubbles continue to appear in the water circulation tank, add 10mL defoaming agent to the tank and the bubbles will disappear.
1. Features:
1. It has strong defoaming and anti-foaming power and low dosage.
2. The emulsion is stable after dilution.
3. It performs well in a larger PH range.
4. Chemically inert, does not change the original properties of the foaming material.
2. Technical Standards:
Exterior | White emulsion |
Emulsion ion type | Non-ionic |
Centrifugal stability (centrifugal test, 3000 rpm, 15 minutes) | No stratification, no precipitation |
PH value | 6～8 |
3. How To Use
1. This product can be added directly or diluted and added to the pit of the process supply water.
2. Use a metering pump to inject the defoamer into the absorption tower intermittently.
3. The frequency of dosing defoamer, the first time dosing of this product should be a one-time impact, and then added once every 24 hours.
4. This product is a new type of defoamer developed for flue gas desulfurization in thermal power plants. It is composed of special organic compounds and modified silicone polyethers. It can well inhibit the flue gas from being in the absorption tower of the wet desulfurization system. A large amount of foam is generated during the washing process by the limestone slurry to prevent dust accumulation at the entrance of the absorption tower. According to different foaming systems, adjust the amount of use, the recommended use range is between a few thousandths to a few ten thousandths.
